Scrap metal yard in Bulgaria, Sofija city. Retail purchase prices Sofia. Iron thick: Maximum dimensions 1500x500x500 mm, thickness over 4 mm. Free of: non-ferrous metals, funnels, bales, briquettes, extruded or loose wires, steel ropes, gas or oxygen cylinders, car tanks and large massive pieces of scrub that cannot be cut. Aluminum: They consist of pure aluminum castings, which may contain automotive but not block ingots and be free of iron, dirt, brass, babbitt and any other foreign material. Thin copper: Consists of mixed, unalloyed copper wire, with a nominal copper content of 96% (min. 94%). Copper thick: Consists of pure, non-tin, unlined, without impurities copper wire and cables, not thinner than number 16 caliber by B&S Brass: Consists of brass castings, rolled brass, reinforced brass, pipes and various yellow brass parts, pipes and various yellow brass parts, including coated brass particles. Be free of manganese bronze, aluminum bronze, free of radiators or radiator parts, free of iron, excessively dirty or corroded materials. It consists of brass castings, rolled brass, reinforced brass, pipes and various yellow brass parts, pipes and various yellow brass parts, including coated brass particles. To be without manganese bronze, aluminum bronze, to be without radiators or radiator parts, without iron, excessively impure or corroded materials. Electrical and electronic equipment categories: Large household appliances, Small household appliances, Information and telecommunications equipment, Consumer appliances, Lighting fixtures. Electric and electronic tools (except for large stationary units - industrial equipment). Electric and electronic toys, entertainment or sports items, Medical devices (excluding all implanted and biologically contaminated items), Monitoring control devices, Automatic machines. picking up. IUMPS are collected at temporary storage sites and disassembly centers by means of specialized 'Roadside Assistance' type cars. The weight of the delivered IUMPS is measured on a scale certified as suitable by the Regional Department of the Main Directorate 'Measures and Measuring Instruments'. Upon acceptance of UMPS, a certificate is issued for its acceptance at a storage site or at a disassembly center, in accordance with the technical requirements laid down in the Ordinance on motor vehicle waste. After receipt of IUMPS in the disassembly centers - from sites for temporary storage or accepted by their owners, they are disassembled in specially designated places for the purpose. Great attention is paid to the separation of the parts of UMPS suitable for reuse, and measures are taken to increase their quantity. Components that are classified as hazardous waste are separated sequentially according to the technical requirements laid down in the Ordinance on Motor Vehicle Waste. Installations for the treatment of MSW. The treatment of IUMPS is carried out with specialized equipment, including: Installation for dry draining of all liquid waste from cars; Equipment for pre-crushing metals before shredding; Guillotine for cutting metals; Shredder to separate the components shredded by the guillotine and the facility, including a magnetic separator for plastics, glass, aluminum, etc. components.
